该软件通过USB电缆或使用无线发射器通过有线或无线LAN连接的计算机远程控制尼康数码单反相机的大部分功能。新款尼康D3和D300的高级功能，例如在传输到计算机之前预览和选择图像的查看器、Liveview功能和图像控制系统都受到支持。它还支持尼康独家冲印软件Capture NX（可选）和浏览器和查看器软件ViewNX的工作流程。
尼康数码单反的大多数设置都是通过USB线连接的，比如曝光模式、快门速度和光圈可以从计算机上远程控制。使用无线发射器时，也可以使用有线或无线LAN。
除了将图像从相机直接传送到计算机之外，从拍摄到保存图像的所有过程都得到了平滑的处理。
增强的查看器功能可实现存储在计算机中的图像的缩略图显示。
与尼康D3/D300的新功能兼容
相机缓冲区中的图像可以在传输前通过计算机上的缩略图或预览显示进行确认，从而删除不必要的图像。这显著提高了效率。
支持D3和D300的Liveview模式（手持式模式和三脚架模式），允许在电脑上确认图像的同时调整焦点和快门释放。在三脚架模式下，可以在特定区域内的所需点上进行焦平面对比度AF。
它还支持摄像头的图像控制系统。图片控制参数可以在计算机上选择和调整，自定义曲线（色调补偿数据）可以创建和注册
51点自动对焦可以控制和显示。
可以对新的白平衡进行微调。
与其他尼康软件的集成
支持ViewNX浏览器和查看器软件
支持Capture NX照片处理软件
新鲜事
•增加了对Z9固件版本2.00的支持。
•增加了对Windows 11的支持。
Nikon Camera Control Pro 2.34.2 (x64) Multilingual
This software remotely controls most functions of Nikon digital SLRs from a computer that is connected via USB cable or through wired or wireless LAN using a wireless transmitter. Advanced functions of the new Nikon D3 and D300 such as Viewer for preview and selection of images prior to transfer to a computer, Liveview function and Picture Control System are supported. It also supports workflows of Nikon’s exclusive photofinishing software Capture NX (optional) and browser and viewer software ViewNX.
Most settings of Nikon digital SLRs, that are connected via USB cable, such as exposure mode, shutter speed and aperture can be controlled remotely from a computer. Wired or wireless LAN is also available when using a wireless transmitter.
In addition to direct transfer of images from a camera to a computer, all procedures from shooting to saving images are smoothly processed.
Enhanced viewer function enables thumbnail display of images stored in a computer.
Compatible with the new functions of the Nikon D3/D300
Images in a camera buffer can be confirmed with thumbnail or preview display on a computer prior to transferring, enabling deletion of unnecessary images. This remarkably increases efficiency.
Supporting the Liveview mode (Hand-held mode and Tripod mode) of the D3 and D300, it permits adjustment of focus point and shutter release while confirming the image on a computer. In Tripod mode, focal-plane contrast AF on a desired point within a specific area is possible.
It also supports Picture Control System of the cameras. Picture Control parameters can be selected and adjusted on a computer, and custom curves (tone compensation data) can be created and registered
51-point AF can be controlled and displayed.
Fine tuning of the new white balance is available.
Integration with other Nikon software
Support for ViewNX browser and viewer software
Support for Capture NX photo-finishing software
Whats New
• Added support for Z 9 firmware version 2.00.
• Added support for Windows 11.
OR
